ALLIED Vision Technologies Oscar F-810 - Manual (Page 11)

Introduction
FireWire Hardware Installation Guide V8.0.0
11
continued from last page
V7.0.7 30.11.10 Revised Manual (added Guppy PRO) — RELEASE status
• Added Stingray in Chapter Marlin/Stingray/Guppy PRO:
changing filters safety instructions on page 21
• Changed URLs in this chapter to the new structured AVT
website.
Added Guppy PRO cameras:
• Added photo of Guppy PRO on title page
• Added Guppy PRO in Chapter IEEE 1394b port pin assign-
ment (Guppy PRO, Pike, Stingray) on page 41
• Added Guppy PRO in Chapter Camera I/O connectors (12
pin) order numbers and cables: Guppy PRO, Stingray, Pike,
Marlin, Oscar
on page 45
• Added Chapter Guppy PRO input block diagram on page 63
• Chapter Guppy PRO delay and minimum pulse width on page
64
• Chapter Guppy PRO block diagram on page 65
• Removed RS232: Chapter Guppy PRO camera I/O connector
pin assignment on page 62
• Chapter Guppy PRO delay on page 67
V7.0.8 07.01.11 • Minor corrections
• Added caution (sensor damage) in Chapter Sensor safety
instructions on page 18
• Added Windows 7 support in Chapter AVT cameras: install-
ing hardware on page 32
• Recommended software package for SmartFeature control is
now AVT Universal Package, see Chapter
AVT software on
page 15.
• Note: Only SmartView of AVT FirePackage provides extended
GUI control options to evaluate AVT 1394 camera smart
features, see Chapter
Overview hardware installation on
page 34.
to be continued on next page
Version Date Remarks
Table 1: Document history