ALLIED Vision Technologies Oscar F-810 - Manual (Page 13)

Introduction
FireWire Hardware Installation Guide V8.0.0
13
– Follow all safety instructions, especially the cautions when con-
necting cameras.
– Take special care when operating board level cameras (Caution-ESD,
general warnings, loading and dirty environments). Read all notes
and safety instructions before operating any AVT board level cam-
era.
• Chapter AVT cameras: installing hardware on page 32 describes the hard-
ware installation procedures. In this chapter you get links to the AVT web-
site (accessories) and you learn how to get more information on installing
software.
– Read this chapter before installing any hardware.
– Read and follow the FireWire hot plug precautions.
– Read and follow the caution when connecting a camera to PC or lap-
top.
• Chapter Camera interfaces on page 37 describes the interfaces of all AVT
cameras (I/O connector and IEEE 1394a and 1394b connectors).
– Read all notes and cautions carefully.
• Chapter Firmware update on page 88 describes how to get information on
firmware updates.
Conventions used in this manual
To give this manual an easily understood layout and to emphasize important
information, the following typographical styles and symbols are used:
Styles
Style Function Example
Bold Programs, inputs or highlighting
important things bold
Courier Code listings etc. Input
Upper case Register REGISTER
Italics Modes, fields Mode
Parentheses and/or blue Links (Link)
Table 2: Styles