ALLIED Vision Technologies Oscar F-810 User Manual
Page 31
AVT camera cleaning instructions
FireWire Hardware Installation Guide V8.0.0
31
6.
If despite warnings you want to clean your camera with compressed air:
7.
Please gently blow the impurities off with dust-filtered, oil-free air
(< 1 bar). Using ionized air will help to remove any dirt stuck to the opti-
cal component because of static electricity.
Figure 6: Don’t use compressed air
Caution
•
Use an air blower/compressed air only if you are familiar
with cleaning a camera with this instrument.
•
Compressed air may push dust into cameras and
lenses. Therefore keep the pressure at a moderate
strength only:
– The pressure at the tube should be less than 1 bar
– operating distance: 5-30 cm
Note
If dust spots remain after cleaning twice, please contact your
AVT dealer.
- Oscar F-510 Oscar F-320 Marlin F-201 Marlin F-146 Marlin F-145 Marlin F-080 Marlin F-046 Marlin F-033 Guppy F-503 Guppy F-146 Guppy F-080 Guppy F-046 Guppy F-044 Guppy F-038 Guppy F-036 Guppy F-033 Pike F-1600 Pike F-1100 Pike F-505 Pike F-421 Pike F-210 Pike F-145 Pike F-100 Pike F-032 Stingray F-504 Stingray F-201 Stingray F-146 Stingray F-145 Stingray F-125 Stingray F-080 Stingray F-033 Guppy PRO F-503 Guppy PRO F-201 Guppy PRO F-146 Guppy PRO F-125 Guppy PRO F-095 Guppy PRO F-046 Guppy PRO F-033 Guppy PRO F-032 Guppy PRO F-031