B&K Precision 2658A - Manual - Manual (Page 76)

70
30) Setting display scale
Command : SCALE* *
( * *: 2 / 5 / 10 )
Example: SCALE10
Query: SCALE?
31) Setting sweep time
Command : SWEEP* * * *
( * * * * : 10M / 30M / 0.1S / 0.3S / 1S / 3S / 10S / 30S / AUTO / ALL)
Example: SWEEP0.1S
Query: SWEEP?
32) Setting detection mode
Command : DET* * *
( * * *: POS / NEG / SMP )
Example: DETPOS
Query: DET?
33) Setting trigger source
Command : TRG* * *
( * * *: INT / EXT)
Example: TRGEXT
Query: TRG?
34) Request AUTOTUNE
Command : AUTO * The response is returned after tuning.
35) Hold/Run function
Command : HOLD
Command : RUN
36) Request marker information
Command : MKRRES * Example of returned data : 1.42G -15dBm
Query: MKRRES?
Command Sweep time
10M 10ms
30M 30ms
0.1S 0.1s
0.3S 0.3s
1S 1s
Command Sweep time
3S 3s
10S 10s
30S 30s
AUTO AUTO
ALL ALL AUTO
Command Display scale
2 2dB/div
5 5dB/div
10 10dB/div
Command Trigger source
INT Internal
EXT External
Command Detection mode
POS Positive peak mode
NEG Negative peak mode
SMP Sample mode
QP QP mode (only for MSA438E)
AVG AVG mode (only for MSA438E)