B&K Precision 2658A - Manual - Manual (Page 28)

22
7.3 Setting with numeric key
1. When is pushed, the following function menu is displayed.
2. , and correspond to , and <. >
and correspond to and .
Changing the center frequency by encoder is available in Ten Key Mode.
3. The center frequency can be entered directly according to “Numeric Key Mapping Diagram” as follows.
“Numeric Key Mapping Diagram”
4. The center frequency is determined by inputting the unit of frequency.
To enter the unit, and are available.
( and are also available.)
* Any figures below the setting resolution (20 kHz) will be truncated.
5. Change of setting
The setting can be changed before pushing the unit key.
: The setting values are cleared.
: The last input digit is deleted.
“.” CLEAR
BACK
SPACE RETURN GHz MHz
F1 F2 F3 F4 F5 F6
HOLD
RUN
SCALE
RBW VBW
SWEEP
AUTO
TUNE
MKR
MEAS CALC
SAVE
LOAD
COPY UTIL DSPL
1 2 3 4 5
6 7 8 9 0
. MHz GHz
F6
F1 F2 F3
F4 F5
UTIL DSPL
F1 F2
F4
F5