Usb device function, 1 outline, 2 how to connect – B&K Precision 2658A - Manual User Manual
Page 70: 3 installation of driver, 4 sample program, Utline, Ow to, Onnect, Nstallation of, River
64
25. USB Device Function
25.1 Outline
The 2650A/2651 series is equipped with two kinds of USB connecters; A and B plugs. The A plug is for USB
host and is connected to USB devices such as USB memory or printer. The B plug is for USB device and is
connected to USB host such as a personal computer. The device function is explained in this chapter.
As for the host function using USB A plug, refer to “23. Storage and print of screen image”.
25.2 How to Connect
When using the USB device, connect with the included USB cable as illustrated
25.3 Installation of Driver
An instrument specified USB driver is necessary in order to control the 2650A/2651 series with a PC via USB
interface, and should be installed in the PC prior to using the software. The driver along with instructions can be
downloaded from our websit
Go to the Support section and select download). After the
downloaded file is unzipped, the 2650A/2651 series is connected to a PC with the USB cable and then the power
is turned on. The detection wizard for the USB driver starts on the PC screen the moment the power of the
2650A/2651 series is turned on, and install it following this wizard.
25.4 Sample Program
Please contact us
o request a sample code which demonstrates how to write a
custom program using the commands in the following section.
USB A plug
USB B plug