B&K Precision 2658A - Manual - Manual (Page 46)

40
2. If the label is not named, “2650A” will be the first part of the file name instead. For example:
2650A_SP001.csv
3. About file name at the time of storage
When SAVE is selected, the file name is displayed in the active area following according to the above labeling
convention.
When SAVE is executed as it is, the data is stored with that file name. If the file exists in the storage device and
is rotated left before SAVE is executed, those file names are displayed one by one.
If SAVE is executed with an existing file name displayed, the data is overwritten on it.
18.4 Load Function
When is pushed, LOAD menu is displayed as follows.
1. When is rotated right or left, the stored file name is displayed one by one from the specified
storage device in the active area as follows.
1) The storage device in which the file is stored.
(USB: USB memory, MEM: built-in memory)
2) The file name selected.
3) Number attached to file
The files in the specified folder of the storage device are sorted in alphabetical order, and this shows that
number.
2. To search files, press
, and the file will be displayed in order of the number attached to it in the active area.
The search steps can be adjusted by pressing to search in steps of 10 files at a time or pressing
to search in steps of 100 files at a time.
Select it according to the number of stored files.
3. When is pushed, LOAD is executed.
* When SPECT is selected, a spectrum waveform is loaded. The setting parameters of loaded spectrum
are displayed in the setting parameters display area.
[Refer to “4. Explanation of screen” for details.]
F1 F2 F3 F4 F5 F6
RETURN 1
File Search Step
10 100
LOAD
EXECUTE
DISP
CLEAR
F2
1) USB : LOAD
2) 2650A_SP012.csv
3) 12
F1
F2
F3
F4