Atec Agilent-E5061B - Manual (Page 34)

34
Storage
Automation
Internal hard disk drive Store and recall instrument states, calibration
data, and trace data into internal hard drive. Trace
data can be saved in CSV (comma separated
value) format. All fi les are MS-DOS
® -compatible.
Instrument states include all control settings,
limit lines, segment sweep tables, and memory
trace data.
File sharing Internal hard disk drive (D:) can be accessed from
an external Windows
® PC through LAN.
Screen hardcopy Printouts of instrument data are directly produced
on a printer through USB interfaces.
System capabilities
Familiar graphical user interface The analyzer employs a graphical user interface
based on Windows
® operating system. There are
three ways to operate the instrument manually:
you can use a hardkey interface, touch screen
interface or a mouse interface.
Limit lines Defi ne the test limit lines that appear on the
display for pass/fail testing. Defi ned limits may be
any combination of horizontal/sloping lines and
discrete data points.
GPIB/LAN/USB Internal
SCPI
Ч Ч
COM
×
Methods
Internal analyzer execution Applications can be developed in a built-in
VBA
® (Visual Basic for Applications) language.
Applications can be executed from within the
analyzer via COM (component object model) or
using SCPI.
Controlling via GPIB The GPIB interface operates to IEEE 488.2 and
SCPI protocols. The analyzer can be controlled
by a GPIB external controller. The analyzer can
control external devices using a USB/GPIB
interface.
LAN
Protocol TCP/IP
Function Telnet, SICL-LAN
USB
Protocol USB Test and Measurement Class (TMC)
interface that communicates over USB, complying
with the IEEE 488.1 and IEEE 488.2 standards.