Atec Agilent-E5061B - Manual (Page 21)

21
Table 26. Test port input (Trace noise)
Description Specification Typical
Trace noise
(at IF automatic bandwidth,
<10 kHz) 5 mdB rms
(at 3 kHz bandwidth, 10 kHz to
30 MHz at -5 dBm, 0 dB
attenuation, 50 Ω) 5 mdB rms
Trace noise phase
(at IF automatic bandwidth,
<10 kHz) 0.03° rms
(at 3 kHz bandwidth, 10 kHz to
30 MHz at -5 dBm, 0 dB
attenuation, 50 Ω) 0.03° rms
Table 27. Test port input (stability)
Description Specification SPD
Stability magnitude < ±0.02 dB/°C
Stability phase < ±0.2°/°C
Table 28. Test port input (Dynamic Accuracy) 1
Description Specification Typical
Dynamic accuracy magnitude
(0 dB attenuation, 50 Ω)
±0.303 dB at -5 dBm
±0.09 dB at -15 dBm
±0.056 dB at -25 dBm
±0.073 dB at -35 dBm
±0.087 dB at -45 dBm
±0.103 dB at -55 dBm
±0.121 dB at -65 dBm
±0.15 dB at -75 dBm
±0.211 dB at -85 dBm
±0.371 dB at -95 dBm
±0.841 dB at -105 dBm
±2.141 dB at -115 dBm
Dynamic accuracy phase
(0 dB attenuation, 50 Ω)
±2.04 ° at -5 dBm
±0.6 ° at -15 dBm
±0.37 ° at -25 dBm
±0.48 ° at -35 dBm
±0.58 ° at -45 dBm
±0.68 ° at -55 dBm
±0.81 ° at -65 dBm
±1.00 ° at -75 dBm
±1.41 ° at -85 dBm
±2.5 ° at -95 dBm
±5.83 ° at -105 dBm
±16.23 ° at -115 dBm ±5 °
(+15 dBm, 20
dB attenuation)
1. Accuracy of the test port input power reading is relative to –25 dBm reference input power level.