Atec Agilent-E5061B - Manual (Page 19)

19
Gain Phase Measurement (Option 3L5 only)
Source Characteristics (LF Out)
Table 20. Source characteristics output frequency
Description Specification Typical
Range 5 Hz to 30 MHz
Resolution 1 mHz
Source stability ±7 ppm (5 °C to 40 °C)
CW accuracy ±7 ppm ±1 mHz
High stability option (Option 1E5)
CW accuracy ±1 ppm ±1 mHz
Source stability ±0.05 ppm (5 °C to 40 °C)
±0.5 ppm per year
Table 21. Source characteristics output power
Description Specification SPD
Level accuracy ±1 dB
(at 0 dBm absolute 200 Hz)
±2 dB
(at 0 dBm, relative to 200 Hz)
Level ±1 dB
(at -10 dBm to 10 dBm, 0
dBm reference) ±1 dB
(at -45 dBm to -10 dBm, 0
dBm reference)
Range –45 dBm to 10 dBm
Sweep range –45 dBm to 10 dBm
Level resolution 0.05 dB
Table 22. Source characteristics output signal purity
Description Specification Typical
Harmonics (2nd or 3rd) < –20 dBc
(at 5 dBm)
Non-harmonic spurious < –25 dBc
(at 5 dBm)
Table 23. Source characteristics output impedance
Description Specification Typical
Impedance 50 Ω nominal
Return loss > 10 dBc