Atec Agilent-E5061B - Manual (Page 14)

14
Test port input
Table 14. Test port input levels
Description Specification Typical
Damage level (Option 3L5) +20 dBm, ±7 V DC
Damage level (Option 115, 135,
215, 235, 117, 137, 217, 237) +20 dBm, ±30 V DC
Absolute Amplitude Accuracy < ±3 dB
(at 0 dBm)
Crosstalk 1
(Option 3L5)
–85 dB (at 5 Hz to 100 Hz)
–100 dB (at 100 Hz to 9 kHz)
–110 dB (at 9 to 100 kHz)
–115 dB (at 100 kHz to 3 GHz)
Crosstalk
(Option 115, 135, 215, 235, 117,
137, 217, 237) –100 dB (at 100 to 300 kHz)
–110 dB (at 300 k to 1MHz)
–115 dB (at 1 MHz to 3 GHz)
Table 15. Test port input (noise fl oor)
Description Specification Typical
Noise Floor (Option 3L5)
3 kHz Bandwidth
–80 dBm (100 k to 1 MHz)
–85 dBm (1M to 3 GHz)
Noise Floor (Option 3L5)
10 Hz Bandwidth
–80 dBm (5 to 100 Hz)
–90 dBm (100 Hz to 9 kHz)
–100 dBm (9 to 100 kHz)
–105 dBm (100 k to 1 MHz)
–110 dBm (1 M to 3 GHz)
Noise Floor (Option 115, 135,
215, 235, 117, 137, 217, 237)
3 kHz Bandwidth
–70 dBm (100 to 300 kHz)
–80 dBm (300 k to 1 MHz)
–85 dBm (1M to 3 GHz)
Noise Floor (Option 115, 135,
215, 235, 117, 137, 217, 237)
10 Hz Bandwidth
–95 dBm (100 to 300 kHz)
–105 dBm (300 k to 1 MHz)
–110 dBm (1M to 3 GHz)
1. The specifi cation might not be met at the frequencies 25MHz and 90 MHz Line and Fan related
frequency.