Atec Agilent-E5061B - Manual (Page 2)

2
Defi nitions
All specifications apply over a 23 °C ±5 °C range (unless otherwise stated) and
90 minutes after the instrument has been turned on.
Specifi cation (spec.):
Warranted performance. Specifications include guardbands to account for the
expected statistical performance distribution, measurement uncertainties, and
changes in performance due to environmental conditions.
Supplemental information is intended to provide information that is helpful for
using the instrument but that is not guaranteed by the product warranty.
Typical (typ.):
Describes performance that will be met by a minimum of 80% of all products. It
is not guaranteed by the product warranty.
Supplemental performance data (SPD):
Represents the value of a parameter that is most likely to occur; the expected
mean or average. It is not guaranteed by the product warranty.
General characteristics:
A general, descriptive term that does not imply a level of performance.
E5061B Test Set Options
50 Ω RF NA options
E5061B-115 Transmission/Refl ection test set, 100 kHz to 1.5 GHz, 50 Ω system
impedance
E5061B-215 S-parameter test set, 100 kHz to 1.5 GHz, 50 Ω system impedance
E5061B-135 Transmission/Refl ection test set, 100 kHz to 3 GHz, 50Ω system
impedance
E5061B-235 S-parameter test set, 100 kHz to 3 GHz, 50 Ω system impedance
75 Ω RF NA options
E5061B-117 Transmission/Refl ection test set, 100 kHz to 1.5 GHz, 75 Ω system
impedance
E5061B-217 S-parameter test set, 100 kHz to 1.5 GHz, 75 Ω system impedance
E5061B-137 Transmission/Refl ection test set, 100 kHz to 3 GHz, 75 Ω system
impedance
E5061B-237 S-parameter test set, 100 kHz to 3 GHz, 75 Ω system impedance
LF-RF NA option
E5061B-3L5 LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz