Atec Agilent-E5061B - Manual (Page 32)

32
Source control
Trace functions
Measured number of points per
sweep User defi nable from 2 to 1601.
Sweep type Linear sweep, segment sweep, log sweep , power
sweep and DC bias sweep.
Segment sweep Defi ne independent sweep segments. Set number
of points, test port power levels, IF bandwidth,
delay time, sweep time independently for each
segment.
Sweep trigger Set to continuous, hold, or single, sweep with
internal, external, manual, or bus trigger.
Power Set source power from -45 dBm to 10 dBm. The
power slope function compensates source power
error.
Display data Display current measurement data, memory
data, or current measurement and memory data
simultaneously.
Trace math Vector addition, subtraction, multiplication or
division of measured complex values and memory
data.
Title Add custom title to each channel window.
Titles are printed on hardcopies of displayed
measurements
Autoscale Automatically selects scale resolution and
reference value to vertically center the trace.
Electrical delay Offset measured phase or group delay by a
defi ned amount of electrical delay, in seconds.
Phase offset Offset measured phase or group delay by a
defi ned amount in degrees.
Statistics Calculates and displays mean, standard deviation
and peak-to-peak deviation of the data trace.