Atec Agilent-E5061B - Manual (Page 15)

15
Table 16. Test port input (trace noise)
Description Specification Typical
Trace Noise Magnitude
(Option 3L5)
source power level = + 10 dBm 5 mdB rms
(< 10 kHz)
Automatic IF Bandwidth
5 mdB rms
(10 kHz to 3 GHz)
3 kHz Bandwidth
Trace Noise Magnitude
(Option 115, 135, 215, 235, 117,
137, 217, 237)
Maximum output power level
3 kHz Bandwidth 15 mdB rms
(100 to 300 kHz)
8 mdB rms
(300 kHz to 1 MHz)
5 mdB rms
(1 MHz to 3 GHz)
Trace Noise Phase (Option 3L5)
source power level = + 10 dBm 0.03° rms
(< 10 kHz)
Automatic IF Bandwidth
0.03° rms
(10 kHz to 3 GHz)
3 kHz Bandwidth
Trase Noise Phase
(Option 115, 135, 215, 235, 117,
137, 217, 237)
Maximum output power level
3 kHz Bandwidth 0.09° rms
(100 to 300 kHz)
0.05° rms
(300 kHz to 1 MHz)
0.03° rms
(1 MHz to 3 GHz)
Table 17. Test port input (stability)
Description Specification SPD
Stability magnitude (Option 3L5)
3 MHz to 3 GHz
0.01 dB/°C
Stability magnitude (Option 115,
135, 215, 235, 117, 137, 217, 237)
100 kHz to 300 kHz
300 kHz to 3 MHz
3 MHz to 3 GHz
0.05 dB/°C
0.02 dB/°C
0.01 dB/°C
Stability phase (Option 3L5)
3 MHz to 3 GHz
0.1 °/°C
Stability phase (Option 115,
135, 215, 235, 117, 137, 217, 237)
100 kHz to 300 kHz
300 kHz to 3 MHz
3 MHz to 3 GHz
0.5 °/°C
0.2 °/°C
0.1 °/°C