Main menu – Alpha Technologies FXM350_Micro350 UPS User Manual
Page 80

017-241-B0 Rev B
78
7.5.2.1 Main Menu Screen — Submenus
Submenus #1, 2 and 4 are read-only screens for monitoring the Alpha FXM. To control the Alpha FXM, use
submenu #3, the Maintenance submenu.
1-Unit Specifications
Unit Model
Input
Voltage
Frequency
Output
Voltage
VA
Battery
Voltage
Software
Version
2-Input/Output Values
Input
Voltage
Current
Frequency
Output1
Voltage
Current
VA
Output2
Voltage
Current
VA
Backfeed
Voltage
Battery
Voltage
Charging Voltage
Temperature
Internal
Temperature
3-Maintenance
30-Battery Test Options
300-Set Battery Test Period
301-Battery Test DOD
31-Inverter On/Off
310-Set Inverter-Off Delay
311-Inverter On/Off
32-Change Password
34-Line Qualify Time
1) Set to 3 seconds (default)
2) Set to 10 seconds
3) Set to 20 seconds
4) Set to 30 seconds
5) Set to 40 seconds
6) Set to 50 seconds
35-Low Battery Warning
Voltage
36-Load Shed Timer
On/Off
1) Timer 1 on
2) Timer 1 off
3) Timer 2 on
4) Timer 2 off
5) Timer 3 on
6) Timer 3 off
4-Line Slow
Detection Setup
This read-only screen shows
the Alpha FXM input voltage
parameters. These values
are factory set and cannot
be changed in the field. See
Specifications, “Boost/Buck/
Line Transfer Thresholds.”
0-Main Menu
Submenus
Submenus
Press Enter to go up 1 level in
the menu tree.
To reach any submenu, type
in its number and press Enter.
To reach the main menu, type
0 and press Enter.
These 2 read-only screens show the Alpha FXM
factory specifications or the present input and output
measurements. The Input/Output Values submenu
does not automatically update. For an updated value,
type
2 and press Enter.
Figure 68 — Menu Tree