Alpha Technologies FXM350_Micro350 UPS - Manual (Page 56)

017-241-B0 Rev B 54
7.3.4 UPS Maintenance Menus
Use the UPS Maintenance screens to configure and adjust the Alpha FXM to meet your operating needs.
To change parameters, either click the On/Off buttons or select an item from a drop down menu.
To execute the changes, click on the Update Configuration button.
7.3.4.1 UPS Maintenance > Unit Configuration
7.3.4.2 Sets the name, input, output and how often the Alpha FXM parameters update.
Figure 36 — UPS Maintenance: Unit Configuration screen
Figure 37 — Restore all default commands
7.3.4.3 Restoring All Parameters to Default Values
The purpose of this command is to reset the Alpha FXM to the factory default parameters in Table D.
CAUTION!
This command resets all parameters that are user-configurable. This command is pass-
word protected. All previously programmed operation will be lost.