Extron Electronics MLA-VC10 - Manual (Page 36)

MLA-VC10 • Configuration and Operation
Configuration and Operation, cont’d
3-8
3. Click the Next button.
4. Select "Extron MLA-VC10" from the "Device" pane. A new
range of options opens in the "Status Commands" pane (see
figure 3-10).
Select status command.
Select device.
Select monitored condition.
Figure 3-10 — Monitored Conditions Wizard (step 4)
5. Select "Volume (Discrete): range (0.100,1)" and choose the
options "Equals" and "0.0" (see figure 3-11).
6. Click on Apply Condition.
7. Click Next.
Set “Condition Test
Parameters” to “Equals”
and “0.0”.
Click “Apply Condition”.
Figure 3-11 — Monitored Conditions Wizard (steps
5-7)