Extron Electronics FPC 5500 - Manual (Page 51)

Extron FPC 5500 • Matrix System Operation 45
I/O Physical Connectors Screen
The I/O Physical Connectors screen (see figure 34) shows how the matrix system is
virtualized. The screen shows the virtual numbers, names, signal types, video and audio
planes, and physical connectors associated with the inputs and outputs. The screen also
provides the tools to name virtual input and outputs.
NOTE: This screen is available on Matrix 12800 systems only.
Figure 34. I/O Physical Connectors Screen
Access the I/O Physical Connectors screen by touching the blue Admin > purple Misc >
gray I/O Physical Connectors buttons.
Touch the green View Inputs or View Outputs button to select the desired connectors.
The field that identifies the physical connector for each plane is comprised of two subfields:
n/yyy. In this field, n is a single digit that identifies the BME number and yyy identifies the
physical connector. In this example,
, 0/001 indicates that the physical output connector
for plane 1 (red) is connector 001 on BME 0.
To return to the Miscellaneous screen, touch the green Return button.