beautypg.com

Bottom panel connections – Extron Electronics FPC 5500 User Manual

Page 14

background image

Extron FPC 5500 • FPC Installation and Operation

8

Bottom Panel Connections

All connectors are on the bottom of the FPC 5500 (see figure

6).

NOTE: The only actively used connection when connected to a matrix is the Ethernet

connection.

Figure 6.

FPC 5500 Front Panel Controller Bottom Panel Features

a

Power switch — This switch turns the FPC 5500 on or off. Press the power switch to

power on the controller and load the FPC 5500 software.

Figure 7.

FPC 5500 Start-up Screen

b

Power Input connector (Phoenix type) — Connect a Phoenix type power cord

between the rear panel power input connector and the included external power supply.

c

USB 2.0 ports — The USB 2.0 ports can be used together with a USB flash drive or an

external USB CD-ROM drive to update the FPC 5500 software.

d

COM ports — These ports are not used with the FPC 5500.

e

VGA — This connector is not used with the FPC 5500.

1

2

3

4

4

4

5

6

3

7

4