beautypg.com

Installing a fan module – Extron Electronics FOX Matrix 14400 User Guide User Manual

Page 87

background image

Installing a Fan Module

1.

Orient the fan to be installed so that the printing on the back of the panel is rightside up.

2.

Align the flanges on the fan with the top and bottom fan guides (see

figure 50

, on the

previous page).

3.

Gently slide the fan into the enclosure until the fan meets resistance.

4.

Gently seat the fan in the backplane.

5.

Use a screwdriver to tighten the top and bottom screws to secure the fan in place.

6.

Secure the row identification plate to the fan.

FOX Matrix 320x and FOX Matrix 14400 • Maintenance and Modifications

81

This manual is related to the following products: