Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 37)

Command and Response Table for SIS Commands (continued)
Command SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Information requests (continued)
NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the
overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware
update, which is available at
www.extron.com .
Query firmware version Q X2$]
Example: Q 1.23 ] The factory-installed controller firmware version
is 1.23 (sample value only).
Query controller firmware
version (verbose) 0Q X2$ - X2% - X2%] Provide a detailed status of the Ethernet protocol
firmware, the controller firmware, and any
firmware upgrade. An asterisk (*) marks the
firmware that is running. A caret (^) marks that
the firmware has a bad checksum or an invalid
load. ?.?? marks that firmware is not loaded.
Response description:
Ethernet protocol firmware version-controller firmware version-updated firmware version ]
Example: 0q
Ethernet protocol
firmware
Description
FOX Matrix firmware version Updated firmware version
* indicates the version running Upload date and time
1.23-1.00(1.68-FOMX Series -Wed, 20 Feb 2008 00:00:00 GMT)-1.00*(1.06-FOMX Series -Mon, 17 Mar 2007 16:39:21 GMT)
Request system status S
FOX Matrix 320x X2^ • X2^ • X2^ • X2^ • X2^ • X2^ • X2^ • X2^ • X2^ • X2& • X2* • X2* • X2* • X2* • X2* • X2* • X2* • X2* • X2( • X2( • X2( • X2(]
FOX Matrix 14400 X2^ • X2^ • X2^ • X2^ • X2^ • X2^ • X2^ • X2& • X2* • X2* • X2* • X2*]
Response description ( FOX Matrix 320x):
+3.3V•+5V•+2.5V•+1.8V•+12V (backplane) •+12V (primary PS1)•+12V (redundant PS1)•+12V (Primary PS2)•+12V (redundant PS2)•Temp•
Fan1 RPM•Fan2•Fan3•Fan4•Fan5•Fan6•Fan7•Fan8•Pri1 PS status•Red1 PS status•Pri2 PS status•Red2 PS status ]
Response description ( FOX Matrix 14400):
+3.3V•+5V•+1.3V•+1.2V•+12V (backplane)•+12V (redundant PS)•+12V (primary PS)•Temp•Fan1 RPM•Fan2•Fan3•Fan4 ]
Example
(
FOX Matrix 14400):
S
Backplane receiving 12.00 V Internal temperature 78.8° F
Fan 1 rotating at 2,909 RPM 3.3 V power system at 3.27 V
3.27•4.95•1.31•1.22•12.00•12.06•12.12•+078.80•02909•02909•02909•02860
NOTE : X2$ = Firmware version number to second decimal place (x.xx)
X2% = Verbose firmware version-description-upload date/time. See above
X2^ = Voltage Positive or negative voltage and magnitude
X2& = Temperature Degrees Fahrenheit
X2* = Fan speed (in RPM)
X2( = Power supply status 1 = Ok 0 = Out of tolerance or failed
FOX Matrix 320x and FOX Matrix 14400 • Programming Guide 31