Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 44)

Installing the Software
The Matrix Switchers Control Program and Firmware Loader are available on the Extron
website. Download and install both programs as follows:
NOTE: Steps 1 through 6, below, are also used to download firmware update packages.
1. Visit www.extron.com and click the Download tab (see figure 14).
3
1
2
2
— OR —
5
4
6
Figure 14. Downloading a Software or Firmware Package
2. Click the Software or Firmware link as appropriate to the operation you are performing.
3. Select the desired software or firmware file to download and click Download .
TIP: Click the appropriate Filter By: letter to jump to the correct page of
downloads.
4. Enter the requested personal information.
TIP: Click Remember Me to eliminate step 4 in future downloads.
5. Click Download to copy the software or firmware to your computer.
6. Click Run to confirm that you want to run the installation.
7. For a firmware download, exit this procedure and return to Updating Firmware on
page 47 or Firmware Upgrade Page on page 70.
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software 38