Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 77)

5. Click the Firmware Upgrade link (see figure 44 on the previous page).
6. Click the Browse button. A Choose File to Upload dialog box appears.
7. Navigate to the folder where you saved the firmware upgrade file. Select the file.
ATTENTION: The firmware file must have an .s19 extension. Other file types can
cause the switcher to stop functioning.
NOTES:
• When downloaded from the Extron website, the firmware is placed in a
subfolder of:
• Windows 7 or Windows 8: C: \ Program Files (x86)\Extron\Firmware .
• Older versions: C: \ Program Files\Extron\Firmware .
• The original firmware is permanently available on the switcher. If the attempted
firmware upload fails, the switcher reverts to the factory-installed firmware.
8. Click the Open button.
9. Click the Upload button. The firmware upload may take a few minutes.
File Management Tab
File Management Page
To delete files such as HTML pages from the switcher or to upload your own files to the
switcher, click the
File Management tab. The switcher downloads the File Management
HTML page (see figure 45).
Figure 45. File Management Page
NOTE: Figure 45 is an example only. Files shown may not be present on your switcher.
To delete a file, click the Delete button associated with that file.
FOX Matrix 320x and FOX Matrix 14400 • HTML Operation 71