Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 25)

Performing Soft System Resets (Resets 3, 4, and 5)
Perform a soft reset of the switcher as follows (see figure 13):
1. Use a small screwdriver to press and hold the rear panel Reset button until the
rear panel Reset LED blinks once (events reset), twice (system reset), or three times
(absolute reset).
Release, then immediately
press and release again.
RESET
RESET
RESET
Release, then immediately
press and release again.
6 seconds
9 seconds
Press and hold
the Reset button.
3 seconds
Reset LED blinks once.
Release, then immediately
press and release again.
Reset LED blinks twice.
Press and hold
the Reset button.
Press and hold
the Reset button.
Reset LED blinks
three times.
IP Settings
Reset
Absolute
Reset
Events
Reset
(Mode 4)
(Mode 5)
(Mode 3)
Figure 13. Resets
2. Release the Reset button and then immediately press and release the Reset button
again. Nothing happens if the second momentary press does not occur within 1 second.
FOX Matrix 320x and FOX Matrix 14400 • Installation 19