Eating a tie, Command and response table for sis commands – Extron Electronics FOX Matrix 14400 User Guide User Manual
Page 31
Command
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
NOTES:
•
The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1, 02*02, or 003*003).
•
Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%.
Create ties
NOTES:
•
The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
•
The ! tie command, & tie command, and % tie command can be used interchangeably.
•
The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
Tie input
X!
to output
X@
X!
*
X@
!
Out
X@
•In
X!
•All
]
Tie input
X!
to output
X@
.
Example:
1*3!
Out003•In001•All
]
Tie input 1 to output 3.
Tie input
X!
to output
X@
X!
*
X@
&
Out
X@
•In
X!
•RGB
]
Tie input
X!
to output
X@
.
Example (see 2nd Note
note above):
10*4&
Out004•In010•RGB
]
Tie input 10 to output 4.
Tie input
X!
to output
X@
X!
*
X@
%
Out
X@
•In
X!
•Vid
]
Tie input
X!
to output
X@
.
Example (see 2nd Note
note above):
7*5%
Out005•In007•Vid
]
Tie input 7 to output 5.
Quick multiple tie
E
+Q
X!
*
X@
!...
X!
*
X@
!
}
Qik
]
!, &, and % ties are valid.
Example:
E
+Q3*4!3*5%3*6!4*7!
}
Tie input 3 to output 4, output 5, and output 6.
Tie input 4 to output 7.
Qik
]
Tie input to all outputs
X!
*!
In
X!
•All
]
Tie input
X!
to all outputs.
Example (see last Note
bullet, above):
5*!
In005•All
]
Tie input 5 to all outputs.
TIP: 0*! clears all ties.
Tie input to all outputs
X!
*&
In
X!
•RGB
]
Tie input
X!
to all outputs.
Example (see last Note
bullet, above):
8*&
In008•RGB
]
Tie input 8 to all outputs.
Tie input to all outputs
X!
*%
In
X!
•Vid
]
Tie input
X!
to all outputs.
Example (see last Note
bullet, above):
10*%
In010•Vid
]
Tie input 10 to all outputs.
Read ties
NOTES:
•
The ! read tie command, & read tie command, and % read tie command can be used interchangeably.
•
When the switcher is in verbose mode, the response is Out
X@
•In
X!
•(All)(RGB) or (Vid)
]
.
Read tied input
X@
!
X!]
Input
X!
is tied to output
X@
.
Read tied input, RGB output
X@
&
X!]
Input
X!
is tied to output
X@
.
Read tied input, Vid output
X@
%
X!]
Input
X!
is tied to output
X@
.
Channel mutes
Channel mute
X@
*1B
Vmt
X@
*1
]
Mute output
X@
(no signal is output, but the
light output remains active).
Channel unmute
X@
*0B
Vmt
X@
*0
]
Unmute output
X@
(signal is output).
Read channel mute status
X@
B
X#]
1 = mute on, 0 = mute off.
Global channel mute
1*B
Vmt1]
Mute all output channels.
Global channel unmute
0*B
Vmt0
]
Unmute all output channels.
NOTE
:
X!
= Input number
000 – (maximum number of inputs for your configuration) (
000 = untied)
X@
= Output number 001 – (maximum number of outputs for your configuration)
X#
= Mute
0 = not muted;
1 = muted
Command and Response Table for SIS Commands
FOX Matrix 320x and FOX Matrix 14400 • Programming Guide
25