Extron Electronics FOX Matrix 14400 User Guide - Manual (Page 63)

4. Enter the file name under which you want to save any changes to the file, and click OK .
5. Select Fiber Matrix as the Matrix Model, 320x or 14400 as the Default Size, and
either singlemode or multimode for each board installed (see figure 34). Click OK .
Figure 34. Emulate Configuration Dialog Box
6. Continue using the program as described on page 41 .
Using the Help System
For information about program features, you can access the help program in any of the
following ways:
• From the Extron Electronics program folder or group, double-click the
MATRIX Switcher Help icon (shown at right).
• From within the Matrix Switchers Control Program, click Help > Contents
on the menu bar.
• From within the Matrix Switchers Control Program, press the keyboard key.
FOX Matrix 320x and FOX Matrix 14400 • Matrix Software 57