Extron Electronics DMP 44 LC User Guide - Manual (Page 60)

2. The USB driver installer launches. When the installer has completed the installation of
the USB drivers, the following screen appears:
Figure 28. Successful USB Driver Installation
3. Click Finish.
USB driver installation is complete.
DSP Configurator Program
Starting the Program
1. To run the DSP Configurator Program, click
Start > Programs > Extron Electronics > DSP Configurator
> DSP Configurator.
The DSP Configurator program starts in
Emulate mode (see “ Emulate Mode vs.
Live Mode ”).
DMP 44 LC • Software Control 54