Extron Electronics DMP 44 LC User Guide - Manual (Page 23)

Filter Block
Each line input channel filter block allows a total of five filters.
The first filter is inserted from a processor list that appears when the block is
double-clicked or via a context window/processor list when the block is right-clicked.
After the processor is inserted, double-clicking opens the setup dialog box.
Figure 8. Filter Block Dialog Box
Additional filters are inserted by opening the filter block dialog box, then selecting a filter
type from the drop-down filter selection list. All filter parameters are modified via the Filter
block dialog box. Each filter loads with all applicable default parameters displayed to the
right of each drop-down filter selection list.
DMP 44 LC • Operation 17