Xylem IM255 AQUAVAR Intelligent Pump Controller - Manual (Page 107)

Number Description Warning Alarm/Trip Alarm/Trip Lock Parameter Reference
165 ATEX ETR
freq.lim.warning
X
166 ATEX ETR
freq.lim.alarm
X
246 Pwr. card supply
250 New spare parts X
251 New Type Code X X
(X) Dependent on parameter
1) Cannot be Auto reset via 14–20 Reset Mode
A trip is the action following an alarm. The trip coasts the motor and is reset by pressing
[Reset] or by a digital input (parameter group 5–1* Digital Inputs [1]). The origin event that
caused the alarm cannot damage the frequency converter or cause dangerous conditions.
A trip lock is an action when an alarm occurs, which could damage the frequency
converter or connected parts. A trip lock situation can only be reset by a power cycling.
Table 28: LED indication
Warning Yellow
Alarm Flashing red
Trip locked Yellow and red
Table 29: Description of Alarm word, Warning word and Extended Status word
Bit Hex Dec Alarm word Alarm word 2 Warning word Warning word
2
Extended
Status word
Extended
Status word 2
Alarm Word Extended Status Word
0
00000001 1 Brake Check
(A28)
ServiceTrip,
read/write
Brake Check
(W28)
Start
Delayed Ramping Off
1 00000002 2 Pwr.card temp
(A69)
ServiceTrip,
(reserved)
Pwr.card temp
(A69)
Stop
Delayed AMA Running Hand/Auto
2 00000004 4 Ground/Earth
Fault (A14)
ServiceTrip,
Typecade/
sparepart
Ground/Earth
Fault (W14)
reserved Start CW/CCW
start_possible
is active, when
the DI
selections [12]
OR [13] are
active and the
requested
direction
matches the
reference sign
Profibus OFF1
active
3 00000008 8 Ctrl.Card
Temp (A65)
ServiceTrip,
(reserved)
Ctrl.Card
Temp (W65)
reserved Slow Down
slow down
command
active, e.g. via
CTW bit 11 oe
DI
Profibus OFF2
active
4 00000010 16 Ctrl. Word TO
(A17)
ServiceTrip,
(reserved)
Ctrl. Word TO
(W17)
Catch Up
catch up
comand
active, e.g. via
CTW bit 12 or
DI
Profibus OFF3
active
Warnings and alarms
Aquavar ® Intelligent Pump Controller INSTRUCTION MANUAL 105