SENA Rhio10 - Manual (Page 90)

90
Parameter when reaction event is received :
WPARAM : Command transfer status flag (ESF_SET_DELAY_PULSE)
LPARAM : Control status flag of the command (False if Time Out Error)
(0x30:Normal operation, 0x39:Abnormal operation, 0x31:Not the Set Mode, 0x32:Not set)
eg. :
In case of Set command :
SRHIOSetting sSetData;
sSetData.sInput.eDelayPulse = ESOF_SETTING;
memset(sSetData.sInput.cDelayPulse,'\0',
sizeof(sSetData.sInput.cDelayPulse));
memcpy(sSetData.sInput.cDelayPulse, "0050000000”, 10)
RHIO_SndCmd_SetDelayPulse(sSetData, 1);
In case of Set Clear command :
SRHIOSetting sSetData;
sSetData.sInput.eDelayPulse = ESOF_CLEAR;
RHIO_SndCmd_SetDelayPulse(sSetData, 1);
RHIO_SndCmd_GetDelayPulse
Description : Used to send the command to check whether it is possible to get the Delay/Pulse
of an input port
Function Prototype :
extern "C" __declspec(dllexport) bool RHIO_SndCmd_GetDelayPulse
(int iPortNum);
Parameter :
int iPortNum : Input port number to check
Return : TRUE if successful, False if failed.
Parameter when reaction event is received :
WPARAM : Command transfer status flag (ESF_MON_DELAY_PULSE)
LPARAM : Control status flag of the command (False if Time Out Error)
(0x30:Normal operation, 0x39:Abnormal operation, 0x31:Not the Set Mode, 0x32:Not set)
※ When reaction event is received, get data using RHIO_GetSettingData function and
check the Delay/Pulse on setting.
eg. : RHIO_SndCmd_GetDelayPulse(1);