SENA Rhio10 - Manual (Page 18)

18
The factory default configuration of IP mode is DHCP mode. In order to detect the Rhio10 for
the first time, users have to perform [Probe] function by using Rhio Manager. If there is a DHCP
server on the users’ environment, then the IP address assigned by the DHCP server is
displayed. Otherwise, it will display the IP address as 0.0.0.0. In this case, users have to change
the IP mode as Static IP mode, and then enter the proper IP address for their environment.
After the Rhio10 is displayed on the [Probe screen], click the unit that users want to connect.
Figure 3-2 Password Enter Dialog box
During the configuration, users may change the parameters as they want. The parameter value
will be maintained as RED color until the changes are reflected by using [Set] button.
Figure 3-3 Network Configuration Screen example