SENA Rhio10 - Manual (Page 19)

19
Users will have to click [Set] button in order to reflect the parameter changes. Once [Set]
operation is done, Rhio10 automatically store the changes and then reboot the system. Be sure
to perform [Probe] function to check whether the changes are made correctly after [Set]
operation.
Figure 3-4 Network Configuration screen
3.1.1 Static IP
In the Static IP mode, users have to manually specify all the parameters such as IP addresses
of the Rhio10, valid subnet mask and the default gateway IP address.
IP address is an identification number assigned to a computer as a permanent address on the
network. Computers use IP addresses to identify and talk to each other on the network. Choose
the proper IP address which is unique and valid on the network environment.
A subnet represents all the network hosts at one geographic location, in one building, or on the
same local area network. When there is any outgoing packet over the network, the Rhio10 will
check whether the desired TCP/IP host specified in the packet is on the local network segment