SENA Rhio10 - Manual (Page 17)

17
3. System Configuration and Administration
3.1 Network Configuration
A valid IP address of the Rhio10 needs to be assigned before it starts to work in the user's
network environment. A network system administrator may provide the user with this IP
address setting information for the network. The IP address must be unique within the network.
Otherwise, the Rhio10 will not have a valid connection to the network.
Users can choose the desired IP mode out of the three IP operating modes, i.e., Static IP,
DHCP and PPPoE. The factory default IP mode is DHCP mode. Table 3-1 shows the parameter
items for IP configuration.
Table 3-1 IP Configuration Parameter
IP address
Subnet mask
Static IP
Default gateway
DHCP No parameters required
PPPoE username PPPoE
PPPoE password
Figure 3-1. Rhio10 Network Configuration screen