SENA Rhio10 - Manual (Page 62)

62
5.3.8 Port Power-out Post Recovery Setting
5.3.8.1 Set Port Power-out Post Recovery command
Command Data Remark
Byte Size 2 12
“14”
( 0x31, 0x34 )
Set Power-out Post
Recovery to
Enable/Disable.
The Port Power-out Post
Recovery setting data
Set Power-out
Post Recovery to
Enable/Disable
for an output port
- Data
Field Data Order Port Data Content
1-4 O1-O4 0x31: Enable, 0x32: Disable
5 - Field Separator 0x2C ( “,” )
6-9 O5-O8 0x31: Enable, 0x32: Disable
10 - Field Separator 0x2C ( “,” )
Output State
11, 12 O9, O10 0x31: Enable, 0x32: Disable
5.3.8.2 Response for Set Port Power-out Post Recovery command
Response Data Remark
Byte Size 2 13
“15”
( 0x31, 0x35 )
Return the Power-out
Post Recovery
setting.
The Port Power-out Post
Recovery setting data
Return the
Power-out Post
Recovery setting
for an output
port.
- Data
Field
Data
Order
Port Data Content
Setting 1 -
0x30: Set OK,
0x31: Not in Setting mode,
0x39: Set NG