SENA Rhio10 - Manual (Page 63)

63
2-5 O1-O4 0x31: Enable, 0x32: Disable
6 - Field Separator 0x2C ( “,” )
7-10 O5-O8 0x31: Enable, 0x32: Disable
11 - Field Separator 0x2C ( “,” )
Output State
12, 13 O9, O10 0x31: Enable, 0x32: Disable
5.3.8.3 Check Port Power-out Post Recovery Setting command
Command Data Remark
Byte Size 2 1
“16”
( 0x31, 0x36 )
Check the Power-
out Recovery
setting.
0x30: Fixed to a dummy
value
Check the Power-
out Recovery
setting for all ports.
5.3.8.4 Response for Check Port Power-out Recovery Setting command
- Same as "5.3.8.2 Response for Set Port Power-out Recovery command".
- The setting field returns Normal (0x30) when it returns.
The initial value is set to Enable for all ports at the time of shipment.