SENA Rhio10 - Manual (Page 32)

32
4. I/O Setting and Application
4.1 I/O Monitoring and Control
You can monitor, control and set I/O states by pressing the [I/O PORT CONTROL] button.
Once [I/O PORT CONTROL] is invoked, Rhio Manager begins to monitor the I/O state by
connecting to a local port of Rhio10 via a TCP socket. To allow this process, the Rhio10 should
be set to TCP server mode.
4.1.1 LED
- ON : Red Icon
- OFF : Blue Icon
- Disable : Grey Icon
- Condition ON/OFF : Green Icon
- Macro: M
- Delay ON: Red D
- Delay OFF: Blue D
- Pulse: P
- Level Mode ADC Port : Green
Figure 4-1 The I/O port Control screen