Rainbow Electronics MAX3540 - Manual (Page 2)

MAX3540
Complete Single-Conversion Television Tuner
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
DC ELECTRICAL CHARACTERISTICS
(MAX3540 Evaluation Kit, V CC = +3.1V to +3.5V, no RF signals at RF inputs, default register settings, V RFAGC = V IFAGC = +3V (minimum
attenuation), T A = 0°C to +85°C, unless otherwise noted. Typical values are at V CC = +3.3V, T A = +25°C, unless otherwise noted.)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V CC to GND ..............................................................-0.3V, +3.6V
RFIN, IFIN_, IFOUT1_, IFOUT2_, IFAGC, RFAGC,
VTUNE, LDO, MUX, CP, XTAL to GND ..-0.3V to (V CC + 0.3V)
SDA, SCL, ADDR2, ADDR1 to GND......................-0.3V to +3.6V
IFOUT__ Short-Circuit Duration .....................................Indefinite
RF Input Power ...............................................................+10dBm
Continuous Power Dissipation (T A = +70°C)
48-Pin fcLGA (derate 25mW/°C above +70°C) ...............1.4W
Operating Temperature Range...............................0°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +165°C
Lead Temperature (soldering, 10s) .................................+240°C
PARAMETER CONDITIONS MIN TYP MAX UNITS
SUPPLY VOLTAGE AND CURRENT
Supply Voltage +3.1 +3.5 V
Receive mode 240 275
Supply Current
Shutdown mode 5
mA
RF and IF AG C Inp ut Bi as C ur r ent At +0.5V and +3V -50 +50 μA
Minimum attenuation +3 RF and IF AGC Control Voltage
(Note 1)
Maximum attenuation +0.5
V
Digital Input Logic-Level Low
0.3 x
V CC
V
Digital Input Logic-Level High
0.7 x
V CC
V
SERIAL INTERFACE
Input Logic-Level Low
0.3 x
V CC
V
Input Logic-Level High
0.7 x
V
CC
V
Input Hysteresis
0.05 x
V CC
V
SDA, SCL Input Current -10 +10 μA
Output Logic-Level Low 3mA sink current 0.4 V
Output Logic-Level High
V CC -
0.5
V
CAUTION! ESD SENSITIVE DEVICE