Grain Systems PNEG-1851 - Manual (Page 26)

Chapter 2: The Portable Dryer
The keypad is displayed and the submenu window is no longer active. The parameter’s current value
is shown in the keypad’s value display.
2. Using the numeric keys, enter a new value that is within its allowable range. To enter the parameter’s
default value, click Default.
To enter 10 minutes and 5 seconds for the out of grain timer parameter,
click 1, 0, 0, 5.
The value is displayed in the keypad’s value display. If the entered value is out of range, an error
message is displayed.
3. Click Save to store the value, or click Cancel to exit without saving and return to the active window.
The keypad is no longer onscreen and the newly entered value is displayed in the respective parame-
ter field.
NOTE: If the newly entered value is not displayed in its respective parameter field once you exit the
keypad, the value has not been stored and is not active.
26 PNEG-1851 Vision N2