VEGA VEGACOM 557 Profibus FMS User Manual
Page 23
VEGACOM 557 Profibus FMS
23
Setup
Basis-SSNR:
- The basic interface number is required exclusively for SIMATIC components. Sectors of 4
interfaces are always reserved (adjustment range: 0, 4, 8 … 254)
Number of interf.:
- This parameter indicates how many interfaces (tiles) are accessed (adjustment range:
1 … 4)
Module size:
- Information on the storage capacity of the storage module.
In addition, the generation date and the system identification can be saved.
SINEC-NCM (ENDE)
Edit - CP Init basic initialisation Source: C:QMESSW
————————————————————————————————————————
Bootstrap data:
SIMATIC sepcifi.
:
L2 - address
: 13
Basis-SSNR
: 0
Active / Passive
: ACTIVE
Number of interf.
: 1
Network data file
: MESSWNCM.NET
Informative parameter
:
Module kind
: EPROM
Module size
: 16 KB
Comp. identificat.
: CP5431
Firmware-version
:
File date
: 15.12.95
System identific.
: VEGACOM 557 PROFIBUS
F
F
F
F
F
F
F
F HELP
1
2
3
4
5
6
7 TAKE OVER
8 CHOICE
3. Menu: Edit –> Network parameter global / local
A difference is made between network parameters local and global. In the global network
parameter mask, bus parameters for all participants of a network can be defined. These bus
parameters can be entered in all databases belonging to the network with Network –> Net-
work adjustment. The local network parameter mask enables a participant-specific editing of
the bus parameters. It must be noted that the baud rates set here are also set on the
PROFIBUS-Gateway VEGACOM 557.