Ohaus E1M110 Explorer Balances - Manual (Page 7)

7
OVERVIEW OF CONTROLS
1
3
4
2
5
6
8
9
10
7
No. Designation Function
1 I Power on off button.
2 Mode button Selects standard weighing, percent, parts counting and animal weighing modes.
3 Units button Selects weighing units.
4 Setup button Selects various submenus: calibration, date, time, readout, GLP data, GLP set, print,
RS232, LFT, function, units, global, custom.
5 >O/T< button When pressed, sets balance to zero.
6 button When pressed, travels up through submenus.
7 button When pressed, travels down through submenus.
8 button When pressed, travels to the left through menus.
9 button When pressed, travels to the right through menus.
10 Enter/Print button When in menus, selects item on display, otherwise prints data.
11 Leveling feet Used to level the balance.
12 Leveling indicator Indicates leveling position of the balance (located at rear of balance).
11
12