Ohaus E1M110 Explorer Balances - Manual (Page 33)

33
4.8 Mode
The Mode submenu permits the selection of five modes which can be turned ON or OFF. These modes are: Weigh,
Percent, Count, Animal and Lock. Weigh is turned ON and all others have a default setting of OFF. When any of
the modes are turned ON, they can be selected for operation from the Mode button.
Procedure
• Press the Setup button, CAL is displayed.
• Press or button until MODE is displayed.
• Press Enter button to continue.
• Press or button until either WEIGH, PER-
CENT, COUNT, ANIMAL, LOCK or EXIT is displayed.
• Press Enter button to continue.
• Press or button and select either ON or
OFF.
• Press Enter button to save setting.
• Press or button to select next item or EXIT.
• Press Enter button to continue.
Weigh
The Weigh submenu is always set to ON as a default.
Percent
Percent weighing permits you to place a reference load on the balance, then view other loads as a percentage of the
reference. Selection is made using the Mode button. The default setting is OFF.
Count
Counting is used when counting quanties of parts. Selection is made using the Mode button. The default setting is
OFF.
Animal
Animal weighing provides special settings to accommodate animal movements. Selection is made using the Mode
button. The default setting is OFF.
Lock
Lock ON/OFF can only be changed when the hardware Lockswitch is set OFF/unlocked. A menu is locked when the
menu lock is set ON and the Lockswitch is ON. Lock when selected and turned on, locks all of the entries made
under the Mode menu. In the locked condition, items may be looked at but not changed in the menu. When set off,
entries may be changed. OFF is the default setting.