Ohaus E1M110 Explorer Balances - Manual (Page 34)

34
4.9 Units
The Units submenu permits the selection of the measuring units which can be turned ON or OFF and locked.
Procedure
• Press the Setup button.
• Press or button until GLOBAL is displayed.
• Press Enter button to continue.
• Press or button until either LIST, RESET,
VERSION, LOCK or LIST is displayed.
• Press Enter button to continue.
• Press or button and select either YES or
NO.
• Press Enter button to save setting.
• Press or button to select next item or EXIT.
• Press Enter button to continue.
4.10 Global
This menu contains three functions which can be set to either a yes or no type of operation. These functions are:
List, Reset and Version. The default setting are NO. Global List is a convienent method of examining which param-
eters are set up in the balance. The parameters do not show up on the display but print out when selected. The
Global menu contains the List function.
Procedure
• Press the Setup button, CAL is displayed.
• Press or button until UNITS is displayed.
• Press Enter button to continue.
• Press or button until desired measuring unit
is displayed.
• Press Enter button to continue.
• Press or button and select either ON or
OFF.
• Press Enter button to save setting.
• Press or button to select next item or EXIT.
• Press Enter button to continue.
Units
Measuring units settings are made using the Units button. This menu permits the measuring units to be turned ON or
OFF. The default setting is OFF.
Lock
Lock when selected and turned on, locks all of the entries made under the Units button. The default setting is OFF.