Ohaus E1M110 Explorer Balances - Manual (Page 20)

20
3.3.6 Calibration GLP Printout
If any option in the GLP Set Menu is turned On, GLP automatically prints data after calibration is completed.
- - - - - SPAN CAL - - - - - -
7/01/97
1:00:00 PM
Bal Id 1234
Cal:
10000.0g
Old: 10000.0g
Dif: 0.0g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
- - - - - INCAL - - - - - -
7/01/97
1:00:00 PM
Bal Id 1234
Cal:
10000.0g
Old: 10000.0g
Dif: 0.0g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
InCAL TM Calibration Printout
When performing InCAL TM calibration with all GLP options
turned on, a printout is automatically made after the
calibration is completed.
- - - - - LIN CAL - - - - - -
7/01/97
1:00:00 PM
Bal Id 1234
Cal:
10000.0g
Old: 9999.8g
Dif: 0.2g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
- - - - - CAL TEST - - - - - -
7/01/97
1:00:00 PM
Bal Id 1234
Cal:
10000.0g
Act: 10000.2g
Dif: 0.2g
Wt. Ref......................................
USER NO 2056853
PROJ NO 100012
Name........................................
- - - - - END - - - - -
Span Calibration Printout
When performing Span calibration with all GLP options
turned on, a printout is automatically made after the
calibration is completed.
Linearity Calibration Printout
When performing a Linearity calibration with all GLP
option turned on, a printout is automatically made after
the calibration is completed.
Calibration Test Printout
When performing a Calibration Test with all GLP options
turned on, a printout is automatically made after the
calibration is completed.