Ohaus E1M110 Explorer Balances - Manual (Page 42)

42
Command Command Command Command Command
Character Character Character Character Character Description Description Description Description Description
x% x% x% x% x% Set % reference function. Uses x (Real Number) as current Percent
Reference. Reference weigh must be entered in grams.
x# x# x# x# x# Set PC reference function. Uses x (Real Number) as current Percent
Reference. Reference weigh must be entered in grams.
Esc R Esc R Esc R Esc R Esc R Resets Setup and Print menus to factory defaults.
CAUTION: This will reset RS232 configuration.
ON ON ON ON ON Turns balance on.
OFF OFF OFF OFF OFF Turns balance off.# # # # # Print current Parts Count Reference Weigh.
% Print current Percent Reference Weigh.
xF xF xF xF xF Set current function, set x for 0=None (normal weigh), 1=percent, 2=parts
Counting, 3=Animal Weighing. None
xAW xAW xAW xAW xAW Set Animal Level from 0 to 3. 0= least amount of filtering.
xE xE xE xE xE Set/Reset Auto Restart in Animal mode. Where x is 0=Off and 1=ON.
E E E E E Start Animal cycle.
xT xT xT xT xT Download tare, tare weight must be entered in grams.
ID ID ID ID ID Print Current User ID String.
xID xID xID xID xID Program User ID String, 1-8 characters.
AC AC AC AC AC Abort Calibration.
xUC xUC xUC xUC xUC User Weight Calibration.
IC IC IC IC IC Internal calibration (InCAL TM)
LE LE LE LE LE Show Last Error Code. Response: Err: Error Number.
SN SN SN SN SN Show Serial Number.
xS xS xS xS xS Print Stable Only. Where x =0 Off and x=1 On.
TIME TIME TIME TIME TIME Print Current Time.
mm/dd/yy SETDATE mm/dd/yy SETDATE mm/dd/yy SETDATE mm/dd/yy SETDATE mm/dd/yy SETDATE Set Date Command and remove Invalid Indicator
hh:mm:ss SETTIME hh:mm:ss SETTIME hh:mm:ss SETTIME hh:mm:ss SETTIME hh:mm:ss SETTIME Set Time Command and Remove Invalid Time Indicator
DATE DATE DATE DATE DATE Prints Current Date. Note.
W$TM W$TM W$TM W$TM W$TM Write Clock Trim Value. The clock can be adjusted by + - 60 seconds a
month.
R$TM R$TM R$TM R$TM R$TM Read Clock Trim value
SETUP SETUP SETUP SETUP SETUP Program Setup menu Options
SW SW SW SW SW Show Lockswitch status.
RS232 COMMAND TABLE (Cont.)