M&C TechGroup PSS-5_3 Operator's manual - Manual (Page 20)

20
Gas sampling and gas conditioning technology 4-2.1.1-ME
17 SPARE PARTS LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and are not binding.
For spare parts of components which are not presented in the following list please see the specific
instruction manuals or leaflets added in the appendix.
Portable Sampling System Versions PSS-5, PSS-5/3
(C) consumable parts, (R) recommended spare parts, (S) spare parts
recommended quantity
PSS-5... being in operation
[years]
C/R/S 1 2 3
Fine filter FP-2T:  (see Fig. 2)
90 F 0002 Filter element F-2T, PTFE, 2µm C 6 12 20
90 F 0040 Viton O-ring, 26 for FP- R 1 1 1
90 F 0056 PVDF filter element clamp F-P S - - 1
90 F 0012 Filter body F-120G of glass R 1 1 1
Fine filter FP-2T with Option LA1S:
90 F 0015 Filter body F-120G-D of glass
with GL25 condensate connection thread
R 1 1 1
90 F 0020 Union nut GL 25 R 1 1 1
90 F 0025 PTFE sealing ring GL 25-12mm Ø R 1 1 1
Peristaltic pump SR25.1:
90 P 1007 SR25 pump hose with PVDF tube connectors
DN 4/6mm
C 1 2 4
Diaphragm pump type N3 KPE/KP18; N5 KPE/KP18
90P2100 Square cap type D3, 1/8“i for N3/N5 KPE/KP18
Material: PVDF S - - 1
90P2120 Diaphragm type S3, for N3/N5 KPE/KP18,
Material: Viton, PTFE coated C 1 2 3
90P2115 Sealing ring type O3, for N3/N5 KPE/KP18,
1 piece, Material: Viton (2 pc. required) C 2 4 6
90P2110 Valve plate type V3, for N3/N5 KPE/KP18,
1 piece, Material: Viton (2 pc. required) C 2 4 6
90P2105 Intermediate plate type Z3, for N3/N5 PE/KP18
Material: PVDF S - - 1
Diaphragm pump type N9 KPE/KP18
90P2200
Square cap type D9, 1/8“i for N9 KPE/KP18,
Material: PVDF
S - - 1
90P2220 Diaphragm type S9, for N9 KPE/KP18,
Material: Viton, PTFE coated C 1 2 3
90P2211 Valve plate with seal for N9 KPE, 1 pc.,
material: Viton. (2 pcs./pump) C 2 4 6
90P2205 Intermediate plate type Z9, for N9 KPE/KP18,
Material: PVDF
S - - 1