M&C TechGroup MP12 Operator's manual - Manual (Page 8)

8
Gas sampling and gas conditioning technology 6-1.1.10-ME
7.1 AMBIENT CONDITIONS
During operation the following ambient conditions must be kept:

Ambient temperature during operating: -10°C .... + 40°C.

The pump must be protected against the effects of dust and water.

During operating an adequate supply of air for cooling must be provided.
7.2 SAFETY
The protection class of the pumps MP06/12 is IP54. In case a high content of water and/or dust load-
ing in the ambience, measures have to be taken to protect the pump before starting-up.
W A R N I N G !
Aggressive medium is possible.
Wear protective glasses and proper protective clothing during
disassembly, repair or cleaning!
The pumps may only be used for their intended purpose.
N O T E !
Components connected to the pump must be designed according
to the pneumatic performance of the pump. (see technical data)
Take care that safety regulations are observed when connecting
the pump to the power supply.
Specific safety instructions concerning sample must be observed.
8 TECHNICAL DATA
Pump series MP Version MP06 Version MP12
Part-No. 03P1000 03P1000a 03P2000
Power supply 230V 50Hz,
70 VA 115V 60Hz,
70 VA 230V 50Hz,
70 VA
Capacity max. without pressure 5,5 l/min 11 l/min
Operating pressure max. 0,25 to 1,8 bar abs.
Sample temperature -20 to +80°C
Ambient temperature -10 to +40°C
Storage temperature -15 to +60°C
Operation mode 100% continuous duty, start of the pump only without pressure!
Protection IP 54 EN 60529
Weight 2,4 kg
Gas connections G1/8” i DIN ISO 228T1
Material of sample wetted parts PTFE, FKM