M&C TechGroup MP12 Operator's manual - Manual (Page 17)

17
Gas sampling and gas conditioning technology 6-1.1.10-ME
16 SPARE PART LIST
Wear, tear and replacement part requirements depend on specific operating conditions.
The recommended quantities are based on experience and are not binding.
Diaphragm sample pump
Type MP06, MP12
(C) consumable parts, (R) recommended spare parts, (S) spare parts
recommended quantity
being in operation [years]
C/R/S 1 2 3
91P1000 Diaphragm type MTF26, material: FPM, PTFE R 1 2 3
91P1005 Valve plate type VTF26, material: FKM R 1 2 3
91P1010 O-ring type OTF26, material: FKM R 1 2 3
91P1015 Pump head, upper part, material: PTFE S - - 1
91P1020 Pump head, basic part, material: PTFE S - - 1
91P1025 Con-rod with bearing S - - 1
91P1030 Counter weight eccentric S - - 1
PVDF Male connectors with G-thread (ISO 1010031)
05V1045 Male connector, DN 4/6-
G1/8” material: PVDF
S - - 2
05V1050 Male connector, DN 6/8- G1/8” material: PVDF S - - 2
05V1055 Male connector, DN10/12- G1/8” material:
PVDF
S - - 2
05V6600 Ferrule DN 4/6 PVDF S 2 2 4
05V6602 Ferrule DN 6/8 PVDF S 2 2 4
05V6604 Ferrule DN 10/12 PVDF S 2 2 4
05V6605 Union nut DN 4/6 PVDF S 2 2 4
05V6607 Union nut DN 6/8 PVDF S 2 2 4
05V6609 Union nut DN 10/12 PVDF S 2 2 4
17 APPENDIX
Further product documentation can be seen and downloaded from our home page:
www.mc-techgroup.com