M&C TechGroup MP12 Operator's manual - Manual (Page 15)

15
Gas sampling and gas conditioning technology 6-1.1.10-ME
14.2 CLEANING

When changing valve plates and diaphragm, inspect all parts for dirt before assembling the pump
head and clean them if necessary.

As far as possible clean the parts with a dry cloth. Solvents should not be used as they can attack
the plastics and synthetic rubber parts. If possible clean the parts with compressed air.
W A R N I N G !
Aggressive medium possible.
Wear protective glasses and proper protective clothing during disas-
sambly, repair or cleaning!