EVS IPDirector Version 5.6 - May 2009 Part 5 User's Manual - Manual (Page 75)

Issue 5.6.F IPDirector Version 5.6 – User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – July 2009
64
6. Creating Media
6.1 HOW TO CREATE CLIPS IN THE
CONTROL PANEL
To be able to create clips in the Control Panel, you need to ensure that:
• You have assigned a channel to the Control Panel
See section 3 ‘Assigning a Channel’ on page 54.
• You have loaded the record train or the clip from which you want to create a
new clip.
See section 4 ‘Loading Media’, on page 56.
Note
Before creating clips on which you want to apply metadata, ensure that
the relevant profile is defined as the current profile.
To create a clip in the Control Panel module, proceed as follows:
1. Create an IN point with one of the following actions:
• Place the position indicator on the jog bar where you want to create the
IN point and select the Mark IN button .
• Enter the timecode of the requested IN point in the IN field and press
ENTER.
The IN point is set:
2. Create an OUT point with one of the following actions:
• Place the position indicator on the jog bar or cue to the place where you
want to create the OUT point and select the Mark OUT button .
• Enter the timecode of the requested OUT point in the OUT field and press
ENTER.
The OUT point is set:
The clip duration is displayed in the Duration field.
3. To save the clip, do one of the following: