EVS IPDirector Version 5.6 - May 2009 Part 5 User's Manual - Manual (Page 54)

IPDirector Version 5.6– User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – July 2009
Issue 5.6.F
43
Function Description
playlist has the same content as the playlist selected. It
also has the same name. It gets an LSM ID.
Properties Displays information related to the owner and the
groups the open playlist has been published to.
2.9.5 P
LAYLIST
N
AME AND
LSM ID
The Name field displays the name of the playlist open in the Clip-List tab. The
playlist LSM ID (made up of the bank number and position in the bank where the
playlist is stored on the XT[2] server) is specified in the right field.
When the users know the playlist name or number, they can enter the full name or
number without slash in the corresponding field and press ENTER.
For more information on the various ways to load a playlist, refer to section 4.4
“Loading a Playlist in the Clip-List Tab”, on page 60.
Note
When the users enter only two digits in the LSM ID field, e.g. “2” and
“5”, and press ENTER, the system automatically loads the local playlist
25/00 if it exists.
2.9.6 P
LAYLIST
F
UNCTIONS
Besides the usual transport functions that can be used for the playlist and are
available in the Clip Transport Functions area, several functions specific to the
playlist are available in the upper part of the Clip-List tab.
RECUE
OR
When the operator presses the Recue button, the system loads the playlist on the
first frame of the first element.
This button is dimmed and not active if the playlist is on air.